Do it yourself
| ||||
|
Hyundai I30 - Video tutorial
Model: Hyundai I30
MK 1, FD
- Years 2007-2012 Is the front bumper of the Hyundai I30 damaged? Let's take it apart and replace it. Let's lift the bonnet and put it in safety. We lift the car with a jack. We remove the rivets placed in the lower part of the bumper. With a plastic lever we remove the fastening rivets placed in the upper part of the bumper. Once the rivets at the top have been removed, we unscrew the stone guard rivets. We remove the bumper from the car body by hand. To proceed with the assembly: let's fix the bumper on the car body with our hands and proceed to tighten all the screws both around the stone guard and around its perimeter. We connect any electrical terminals.
Posted on 9 December 2023 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |