Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear bumper of the Hyundai I30

Model: Hyundai I30 FD, MK 1 - Years 2007-2012
Part: Rear bumper

Following these brief steps, we will see how to disassemble and replace the rear bumper of the Hyundai I30. First, open the rear hatch of the trunk and start disassembling and removing the rear lights, unscrewing the fixing screws and disconnecting the electrical connectors of the bulbs; then unscrew all the screws found on both sides of the rear wheel arches, as shown in the video. At this point, gently detach the bumper on the sides until it is completely removed, then install the new one; finally, reassemble the rear lights, making the connection.

Posted on 28 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Hyundai i30
How to Remove the Front Bumper from a Hyundai i30
Hyundai I30 (2007-2012 / FD, MK 1) Is the front bumper of your Hyundai i30 damaged? Remove and replace it. Lift the bonnet and secure it. Raise the car with a jack. Remove the rivets l…
How to Remove the Front Headlamp from a Hyundai i30?
How to Remove the Front Headlamp from a Hyundai i30?
Hyundai I30 (2007-2012 / FD, MK 1) To remove the front headlamp from a Hyundai i30, open the bonnet to access the screws securing the bumper from the top. Then, proceed to loosen the s…
How to disassemble the headlight of a Hyundai I30
How to disassemble the headlight of a Hyundai I30
Hyundai I30 (2011-2016 / MK 2, GD) In today's video, we will see how to disassemble the front headlight of a second generation Hyundai i30. We start by opening the engine compartment o…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos