Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the bumper of the Hyundai Kona?

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Rear bumper

See other generations:
Video tutorial

It is not necessary for a car bumper to be removed only to repair or replace it, after it has been involved in an accident, whether small or large. Often, the decision is made to change the appearance of the vehicle, so aftermarket components, such as the bumper, are installed.

For this work, we rely on the video tutorial available here: Essentially, the bolted parts are on the fenders and in the upper part of the bumper, in fact, once these are removed, it can be pulled to detach it from the body, without forgetting to disconnect the connector of the electrical power cables, present at the back.


Posted on 17 March 2025 by ScegliAuto


Related tutorials

How to disassemble the front bumper of the Hyundai Kona
How to disassemble the front bumper of the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Today we will explain how to remove the front bumper of the Hyundai Kona. To remove the bumper, we need to detach the trim located between the right …
How do you remove the rear bumper of the Hyundai Kona?
How do you remove the rear bumper of the Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) To remove the rear bumper of the Hyundai Kona, you need to open the tailgate so that you can locate the screws that secure the bumper from the top. O…
How to Open the Bonnet of the Hyundai Kona
How to Open the Bonnet of the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Follow the procedure below to open the bonnet of the Hyundai Kona, following the instructions provided. First, open the front door and pull the lever…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos