Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Bonnet of the Hyundai Kona

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Body

Follow the procedure below to open the bonnet of the Hyundai Kona, following the instructions provided. First, open the front door and pull the lever located at the bottom on the driver's side; then move to the bonnet and release the lever found in the centre, between the bumper and the bonnet itself, as shown in the video. At this point, lift the bonnet and secure it with the prop rod; all that remains is to lower the bonnet again to close it until the latch clicks!

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai Kona (2017-2023 / MK 1) In this tutorial, see how to open the bonnet on a Hyundai Kona, a very simple operation that follows the standard procedure. First, open the driver's…
Hyundai Kona (2017-2023 / MK 1) How do you open the bonnet of the Hyundai Kona? Follow these steps: pull the lever located at the bottom left of the dashboard, then lift the bonnet …
Hyundai Kona (2017-2023 / MK 1) In this guide for your Hyundai Kona, learn how to safely and quickly replace the battery. Before starting, ensure your car is completely off during t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos