Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the engine hood of the Hyundai Kona

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Checks and maintenance

See other generations:
Video tutorial

These short and simple instructions will show us how to open the hood of the Hyundai Kona, following these simple steps. First, we open the front door and start pulling the lever that we find at the bottom, near the pedals; then we move to the front of the car and start releasing the hood opening lever, located in the middle (between the bumper and the hood), as shown in the video.

At this point, we raise the hood held by the hydraulic pistons or, if not present, we secure the rod; we lower the hood to close it.


Posted on 18 December 2024 by ScegliAuto


Related tutorials

How to replace the light bulb of the 2020 Hyundai Kona
How to replace the light bulb of the 2020 Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Today we will explain how to replace the headlight bulb of the 2020 Hyundai Kona. To replace a bulb, we need to open the front hood of the car and th…
Replacing the Timing Chain of the Hyundai Kona 1.0 TGDI
Hyundai Kona (2017-2023 / MK 1) Today's main instructions will show you how to dismantle and replace the timing chain of the Hyundai Kona 1.0 TGDI. First, open the bonnet and start …
How to Open the Bonnet on a Hyundai Kona?
How to Open the Bonnet on a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) In this tutorial, see how to open the bonnet on a Hyundai Kona, a very simple operation that follows the standard procedure. First, open the driver's…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos