Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing chain of the Hyundai Kona 1.0 TGDI

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Timing belt

Today's main instructions will show us how to disassemble and replace the timing chain of the Hyundai Kona 1.0 TGDI. First, we open the hood of the car and start by removing the cylinder head cover, unscrewing all the top screws; we lift the car and remove the V-belt and the crankshaft pulley, as shown in the video. At this point, we remove the engine support, taking the necessary references for the replacement of the timing chain; we then install the original one, following the video tutorial until the end!

Posted on 27 November 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the battery of the Hyundai Kona remote control?
How do you replace the battery of the Hyundai Kona remote control?
Hyundai Kona (2017-2023 / MK 1) To replace the battery of the Hyundai Kona remote control, you need to lower the small switch located on the back of the device: by lowering this swi…
How to Replace Oil and Filter on Hyundai Kona
How to Replace Oil and Filter on Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) How to replace oil and filter on a Hyundai Kona? Open the car door and pull up the engine compartment release lever located at the bottom left of the…
Battery replacement for Hyundai Kona remote control.
Battery replacement for Hyundai Kona remote control.
Hyundai Kona (2017-2023 / MK 1) These brief steps will show us how to disassemble and replace the battery of the key remote for the Hyundai Kona. First, we take our remote and start…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos