Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Key Fob Battery for the Hyundai Kona

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

Let’s look at the steps to disassemble and replace the battery in the key fob for the Hyundai Kona. First, take the key fob in hand and remove the physical key from inside it; then leverage the internal slot of the fob to open the casing into two parts, as shown in the video.

At this point, remove the electronic board and the battery, replacing the latter with a new one (in this case, a CR 2032 3V); insert it in the correct orientation and reassemble the fob, thus completing the replacement.


Posted on 28 May 2026 by ScegliAuto


Related tutorials

How to Change the Key Fob Battery for the Hyundai Kona
How to Change the Key Fob Battery for the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Follow these step-by-step instructions to disassemble and replace the battery in the key fob for the Hyundai Kona. First, take your key fob and remov…
How to Change the Remote Battery for the 2025 Hyundai Kona
How to Change the Remote Battery for the 2025 Hyundai Kona
Hyundai Kona (2023-2026 / MK 2) If the remote for your new 2025 Hyundai Kona has stopped working and you are sure the issue is a dead battery, you can follow the steps outlined in t…
How to Replace the Battery in a Hyundai Kona Remote
How to Replace the Battery in a Hyundai Kona Remote
Hyundai Kona (2017-2023 / MK 1) In this short and simple video tutorial, learn how to replace the battery in a Hyundai Kona key fob. First, extract the physical key from the remote …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos