Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Hyundai Kona Remote

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

In this short and simple video tutorial, learn how to replace the battery in a Hyundai Kona key fob. First, extract the physical key from the remote by sliding the small lever on the back to unlock it and pull it out. Next, insert a small flathead screwdriver into the gap created by removing the key and twist it to release the clips of the remote, allowing you to open it. Once the remote is opened, the battery will be immediately visible and ready to be replaced.

The required battery for this type of remote is a CR2032.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Hyundai Kona Remote
How to Replace the Battery in a Hyundai Kona Remote
Hyundai Kona (2017-2023 / MK 1) In this short tutorial, you can see the simple steps to replace the battery in a Hyundai Kona remote. First, press the unlock button and remove the p…
Guide to Replacing the Key Fob Battery for the Hyundai Kona
Guide to Replacing the Key Fob Battery for the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Let’s look at the steps to disassemble and replace the battery in the key fob for the Hyundai Kona. First, take the key fob in hand and remove the ph…
How to Change the Key Fob Battery for the Hyundai Kona
How to Change the Key Fob Battery for the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Follow these step-by-step instructions to disassemble and replace the battery in the key fob for the Hyundai Kona. First, take your key fob and remov…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos