Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Key Fob Battery for the Hyundai Kona

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Key

Follow these step-by-step instructions to disassemble and replace the battery in the key fob for the Hyundai Kona. First, take your key fob and remove the physical key from inside it; then use a thin lever to open the fob into two parts, gaining access to the battery and electronic board, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type (in this case, a CR 2032 3V); insert it the right way round and reassemble the fob, inserting the key back into the fob!

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai Kona (2017-2023 / MK 1) The replacement of the battery of the Hyundai Kona remote control is done by lowering the lever located at the top of the device: in this way it will…
Hyundai Kona (2017-2023 / MK 1) In this short and simple video tutorial, learn how to replace the battery in a Hyundai Kona key fob. First, extract the physical key from the remote …
Hyundai Kona (2023-2026 / MK 2) If the remote for your new 2025 Hyundai Kona has stopped working and you are sure the issue is a dead battery, you can follow the steps outlined in t…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos