How to fill the fuel tank of a Keeway Superlight 125
Superlight .. Before we can begin, we will have to drive our Keeway Superlight 125 to a gas station. So let's start by inserting the motorcycle key inside the lock.. .. this is done, we will have to go and insert the fuel pump gun into the hole in the tank, and then pull the trigger. In doing so, the fuel will begin..

How to install additional position lights on the Keeway Superlight 125.
Superlight 125 .. that will allow us to install additional position lights on the Keeway Superlight 125 motorcycle. First of all, we put our motorcycle on the center..

How to disassemble and clean the carburetor of the Keeway Superlight 125
Superlight 125 .. to disassemble and clean the carburetor of the Keeway Superlight 125 motorcycle, following these simple steps. First of all, we are going to unscrew.. .. the throttle and air cables, then remove the fuel pipe, as shown in the video. At this point we remove the carburetor from the engine; we disassemble..

How to turn on a Keeway Superlight 125
Superlight 125 .. We begin by sitting on the driver's seat of our Keeway Superlight 125. After that, we will have to insert the key into the ignition, then turn the key,..

How to replace the motor oil in the Keeway Superlight 125?
Superlight 125 .. we can see how to replace the engine oil in the Keeway Superlight 125, a very simple and quick operation, to be carried out every 12 months. First of.. .. for the engine to be sufficiently cool, then we position a container under the motorcycle, locate the drain hole bolt and unscrew it using a 17mm wrench...