Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before you can start, take your Keeway Superlight 125 to a petrol station. Begin by inserting the motorcycle key into the lock on the fuel tank cap, then turn it. Next, remove the cap from its housing. Once done, insert the fuel pump nozzle into the tank opening and press the trigger. This will start the fuel flowing into the tank. Keep holding the trigger until you have dispensed the desired amount of fuel. When you have completed this step, remove the fuel pump and close the tank with the cap, and you will be finished.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Keeway Superlight?
How do you replace the air filter of the Keeway Superlight?
Superlight In order to replace the air filter of the Keeway Superlight, you will need to loosen the screws that secure the cover of the filter box to its housin…
How to Replace the Seat on a Keeway Superlight?
How to Replace the Seat on a Keeway Superlight?
Superlight To replace the seat on a Keeway Superlight, loosen the screws located on the side of the bike, both on the right and the left. You will also need to …
Engine Oil Change on Keeway Superlight 125
Engine Oil Change on Keeway Superlight 125
Superlight Start the engine for a few minutes to warm the oil, making it less viscous and facilitating its subsequent removal. Using a 17 mm spanner, unscrew th…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos