Do it yourself
Frequently asked questions about cars and motorcycles
To replace the headlamp bulb on a Keeway Superlight, you need to loosen the screws located at the bottom of the headlight assembly. Once these screws are loosened, you can completely detach the headlamp lens to access the components inside. The bulb can then be disconnected from its connector, allowing you to connect the new replacement part. After the new part has been properly inserted and connected, reinstall the headlamp lens.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Superlight To replace the headlamp bulb on a Keeway Superlight, loosen the screws securing the front light unit. You will find the screws at the bottom of the h…
Superlight In this tutorial, we will see how to replace the front headlight bulb on a Keeway Superlight, a very simple and quick operation. First, ensure that t…
Superlight In order to replace the air filter of the Keeway Superlight, you will need to loosen the screws that secure the cover of the filter box to its housin…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos