Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Keeway Superlight 125?

Model: Keeway Superlight 125
Part: Engine oil

Video tutorial

This tutorial shows how to change the engine oil in a Keeway Superlight 125, a very simple and quick operation to perform every 12 months. First, wait until the engine is sufficiently cool, then position a container underneath the bike, locate the drain bolt, and loosen it using a 17mm spanner.

Allow all the oil in the system to drain out, clean any residual dirt, and reassemble everything. Finally, pour the necessary amount of oil through the designated hole, using a funnel if needed.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Change the Engine Oil and Oil Filter on the Keeway Superlight 125
Change the Engine Oil and Oil Filter on the Keeway Superlight 125
Superlight 125 In this brief and simple guide, we will go through the step-by-step instructions to perform the routine maintenance service by changing the engine oi…
How to Change the Engine Oil in the Keeway Superlight 125
How to Change the Engine Oil in the Keeway Superlight 125
Superlight 125 In this tutorial, we will see how to change the engine oil in the Keeway Superlight 125, a very simple and quick operation. First, ensure that the en…
How to Start a Keeway Superlight 125
How to Start a Keeway Superlight 125
Superlight 125 Start by sitting on the rider's seat of your Keeway Superlight 125. Next, insert the key into the ignition switch and turn the key to activate the da…

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos