Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Keeway Superlight 125

Model: Keeway Superlight 125
Part: Engine oil

Video tutorial

In this tutorial, we will see how to change the engine oil in the Keeway Superlight 125, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then place a container underneath the bike, locate the drain hole bolt and unscrew it using a 17mm socket spanner.

Allow all the oil in the system to drain out, unscrew the filter cap and clean the filter of any dirt residue. At this point, simply reassemble everything and add the necessary amount of oil through the designated upper hole.


Posted on 19 October 2026 by ScegliAuto


Related tutorials

Change the Engine Oil and Oil Filter on the Keeway Superlight 125
Change the Engine Oil and Oil Filter on the Keeway Superlight 125
Superlight 125 In this brief and simple guide, we will go through the step-by-step instructions to perform the routine maintenance service by changing the engine oi…
How to Change the Engine Oil in a Keeway Superlight 125?
How to Change the Engine Oil in a Keeway Superlight 125?
Superlight 125 This tutorial shows how to change the engine oil in a Keeway Superlight 125, a very simple and quick operation to perform every 12 months. First, wai…
How to Start a Keeway Superlight 125
How to Start a Keeway Superlight 125
Superlight 125 Start by sitting on the rider's seat of your Keeway Superlight 125. Next, insert the key into the ignition switch and turn the key to activate the da…

How to replace the ignition switch on a Piaggio Typhoon 125?

To replace the ignition switch on a Piaggio Typhoon 125, loosen the screws securing the inner panel of the front fairing: these screws are located on both sides of the panel. Once the screws are removed, detach the panels and then proceed to loosen the screws; after loosening these screws, locate the lock that needs to be removed by unscrewing it. Once the old lock is free, disconnect the wires and replace it with a new one.

Watch the video!


by ScegliAuto

More videos