Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on the BMW R1200 RT

Model: Bmw R1200 Rt
Part: Headlight bulb

Video tutorial

In this brief and simple guide, learn how to remove and replace the headlight bulb on the BMW R1200 RT motorcycle. First, place your motorcycle on the centre stand and begin removing the plastic cover located behind the bulb, next to the instrument panel; then disconnect the electrical connector of the bulb by releasing it from the housing.

At this point, install the new bulb of the correct type and fitting; secure it in the headlamp unit and reconnect everything!


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulbs on a BMW R1200 RT
Replacing the Front Headlight Bulbs on a BMW R1200 RT
R1200 Rt Today's main instructions will show you how to remove and replace the front headlight bulbs on a BMW R1200 RT. First, place the motorcycle on a stand…
How to Replace the Front Indicator Bulbs on the BMW R1200 RT
How to Replace the Front Indicator Bulbs on the BMW R1200 RT
R1200 Rt In today's video, you will see the steps to remove and replace the front indicator bulbs on a BMW R1200 RT motorcycle. To access the indicator bulb, …
How to replace the front headlight bulbs in the BMW R1200 RT?
How to replace the front headlight bulbs in the BMW R1200 RT?
R1200 Rt Replacing the front headlight bulbs in the BMW R1200 RT is an extremely simple and quick operation; let's see how to proceed in this tutorial. First,…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos