Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulbs on a BMW R1200 RT

Model: Bmw R1200 Rt
Part: Headlight bulb

Video tutorial

Today's main instructions will show you how to remove and replace the front headlight bulbs on a BMW R1200 RT. First, place the motorcycle on a stand and begin removing the front headlight by unscrewing all the fixing screws; then disconnect the electrical connector of the bulb and release the metal clip to remove it from the headlamp, as illustrated in the video.

If necessary, replace the entire headlamp by installing the appropriate bulb (with the same fitting); then reassemble the optical unit and check its operation by following the video tutorial to the end!


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulbs in the BMW R1200 RT?
How to replace the front headlight bulbs in the BMW R1200 RT?
R1200 Rt Replacing the front headlight bulbs in the BMW R1200 RT is an extremely simple and quick operation; let's see how to proceed in this tutorial. First,…
Guide on How to Replace the Mirror Glass on the BMW R1200 RT
Guide on How to Replace the Mirror Glass on the BMW R1200 RT
R1200 Rt In this brief and simple guide, remove and replace the external rear-view mirror glass on the BMW R1200 RT by following the instructions below. First…
Replacing the Headlight Bulb on the BMW R1200 RT
Replacing the Headlight Bulb on the BMW R1200 RT
R1200 Rt In this brief and simple guide, learn how to remove and replace the headlight bulb on the BMW R1200 RT motorcycle. First, place your motorcycle on th…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos