Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the BMW R1200 RT?

Model: Bmw R1200 Rt
Part: Headlight bulb

Video tutorial

Replacing the front headlight bulbs in the BMW R1200 RT is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, ensure that the key is not inserted, then locate the cap at the back of the headlight, accessible from the lower area of the handlebars, and remove it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the headlight.

At this point, you can insert the replacement, avoiding touching the glass with bare hands, and reassemble everything by following the reverse procedure.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Indicator Bulbs on the BMW R1200 RT
How to Replace the Front Indicator Bulbs on the BMW R1200 RT
R1200 Rt In today's video, you will see the steps to remove and replace the front indicator bulbs on a BMW R1200 RT motorcycle. To access the indicator bulb, …
Replacing the Front Headlight Bulbs on a BMW R1200 RT
Replacing the Front Headlight Bulbs on a BMW R1200 RT
R1200 Rt Today's main instructions will show you how to remove and replace the front headlight bulbs on a BMW R1200 RT. First, place the motorcycle on a stand…
How to Replace the Brake Pads on the BMW R1200 RT
How to Replace the Brake Pads on the BMW R1200 RT
R1200 Rt Here are the step-by-step instructions for removing and replacing the front brake pads on the BMW R1200 RT motorcycle. First, place your motorcycle o…

How to Replace the Clutch on a Kymco Downtown 125?

To replace the clutch on the Kymco Downtown 125, loosen the screws that secure the cover located on the left side of the bike, near the rear wheel. Once the screws are loosened, remove the cover to access the components underneath: the clutch at the rear can be removed by unscrewing the fixing screws and sliding out all the discs that make it up. At this point, insert the new replacement part, reposition the drive belt, and cover everything with the cover.

Watch the video!


by ScegliAuto

More videos