Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Indicator Bulbs on the BMW R1200 RT

Model: Bmw R1200 Rt
Part: Light bulb

Video tutorial

In today's video, you will see the steps to remove and replace the front indicator bulbs on a BMW R1200 RT motorcycle. To access the indicator bulb, first unscrew the screw found inside the rearview mirror to detach the entire unit; then disconnect the electrical connector of the bulb and remove the indicator, as shown in the video.

Now replace the old bulb with the new one of the correct type; all that remains is to refit everything by applying the reverse procedure of disassembly!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulbs on a BMW R1200 RT
Replacing the Front Headlight Bulbs on a BMW R1200 RT
R1200 Rt Today's main instructions will show you how to remove and replace the front headlight bulbs on a BMW R1200 RT. First, place the motorcycle on a stand…
How to replace the front headlight bulbs in the BMW R1200 RT?
How to replace the front headlight bulbs in the BMW R1200 RT?
R1200 Rt Replacing the front headlight bulbs in the BMW R1200 RT is an extremely simple and quick operation; let's see how to proceed in this tutorial. First,…
How to Replace the Indicator Bulb on the BMW R1200 RT
How to Replace the Indicator Bulb on the BMW R1200 RT
R1200 Rt Let’s see how to replace the indicator bulb on the BMW R1200RT: you need to move the mirror glass of the side mirrors downwards to access the top wit…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos