Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Bulb on the BMW R1200 RT

Model: Bmw R1200 Rt
Part: Light bulb

Video tutorial

Let’s see how to replace the indicator bulb on the BMW R1200RT: you need to move the mirror glass of the side mirrors downwards to access the top with a T25 socket and remove the screw. This way, the entire indicator block comes off, and at this point, it is very simple to remove the bulb for replacement.

The YouTuber rightly reminds us not to touch it with bare hands to avoid shortening its lifespan. Reinsert it into the indicator block and screw the screw back in from inside the mirror, which you can now put back in place.


Posted on 22 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Indicator Bulbs on the BMW R1200 RT
How to Replace the Front Indicator Bulbs on the BMW R1200 RT
R1200 Rt In today's video, you will see the steps to remove and replace the front indicator bulbs on a BMW R1200 RT motorcycle. To access the indicator bulb, …
Replacing the Headlight Bulb on the BMW R1200 RT
Replacing the Headlight Bulb on the BMW R1200 RT
R1200 Rt In this brief and simple guide, learn how to remove and replace the headlight bulb on the BMW R1200 RT motorcycle. First, place your motorcycle on th…
Replacing the Front Headlight Bulbs on a BMW R1200 RT
Replacing the Front Headlight Bulbs on a BMW R1200 RT
R1200 Rt Today's main instructions will show you how to remove and replace the front headlight bulbs on a BMW R1200 RT. First, place the motorcycle on a stand…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos