How to Change the Engine Oil in the Yamaha MT-25?

Model: Yamaha Mt 25
Part: Engine oil

Video tutorial

In this tutorial, we will see how to change the engine oil in the Yamaha MT-25, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then remove the lower cover and place a container underneath the bike.

Next, locate the drain hole bolt, unscrew it using a 12mm socket, and let all the oil in the system drain out. At this point, simply unscrew the old filter, tighten the replacement, reassemble everything, and add the necessary amount of oil through the designated upper hole.

Posted on 19 October 2026 by ScegliAuto

Related tutorials

How to Change the Engine Oil in the Yamaha MT-25?

Mt 25 .. In this tutorial, you will see how to change the engine oil in the Yamaha MT-25, a very simple and quick operation. First, ensure that.. …

How to Change the Engine Oil in a Yamaha MT-25?

Mt 25 In this tutorial, we will see how to change the engine oil in a Yamaha MT-25, a very simple and quick operation. First, ensure that the engine is coo…

How to set the time on the Yamaha MT-25?

Mt 25 In this tutorial, we will see how to adjust the time on the Yamaha MT-25, a very simple and quick operation to perform, for example, after disconnect…

How to Replace the Fuel Pump on the Husaberg FE 570?

To replace the fuel pump on the Husaberg FE 570, loosen the plastics located on the sides of the fuel tank, which is installed at the front of the bike: once these plastics are removed, you can free the fuel tank from its housing to slide the pump out from the top. The pump must then be extracted and disconnected from the relevant hoses below: this will allow you to insert the new pump, which must be properly connected and secured with screws.

Watch the video!

by ScegliAuto

How to Change the Engine Oil in the Yamaha MT-25?

Related tutorials

How to Replace the Fuel Pump on the Husaberg FE 570?

More videos