Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on the Yamaha MT-25?

Model: Yamaha Mt 25
Part: Clock

Video tutorial

In this tutorial, we will see how to adjust the time on the Yamaha MT-25, a very simple and quick operation to perform, for example, after disconnecting the battery or when switching to daylight saving time. First, insert the key, then turn on the instrument panel and hold down both dashboard buttons for the necessary time until the clock starts to blink.

Next, adjust the hour using the right button, switch to the minutes with the left button, and similarly adjust them as well before finally saving the settings.


Posted on 20 December 2025 by ScegliAuto


Related tutorials

How to Set the Time on a Yamaha MT-25?
How to Set the Time on a Yamaha MT-25?
Mt 25 In this tutorial, we will see how to set the time on a Yamaha MT-25, an extremely simple and quick operation, for example, after disconnecting the ba…
How to adjust the time on the Yamaha MT-25?
How to adjust the time on the Yamaha MT-25?
Mt 25 In this tutorial we can see how to adjust the time on the Yamaha MT-25, an extremely simple and quick operation, to be carried out for example after …
How to Reset the Service on Yamaha MT-25?
How to Reset the Service on Yamaha MT-25?
Mt 25 In this tutorial, we will see how to reset the service on the Yamaha MT-25, an extremely simple and quick operation, to be performed only after compl…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos