Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gearbox Oil on a Moto Guzzi V7?

Model: Moto Guzzi V7 Classic
Part: Transmission fluid

Video tutorial

To change the gearbox oil on a Moto Guzzi V7, ensure the bike is on a flat and stable surface, preferably using a centre stand to maintain the correct position. Prepare a suitable container to collect the used oil and a spanner to remove the drain plugs.

Locate the oil drain plug, usually found at the bottom of the gearbox casing. Position the container under the plug and carefully unscrew it. Allow the used oil to fully drain into the container; this process may take a few minutes to ensure all oil is removed.

Once draining is complete, refit and tighten the drain plug to seal the casing. After securing the drain plug, locate the oil fill opening, typically at the top of the gearbox.

Fill with the new oil specified for the V7 model, using a funnel to avoid spills. After filling, screw the fill plug back on and ensure it is securely fastened.

Start the engine and let it run briefly to allow the oil to distribute evenly within the gearbox. Turn off the engine and check for any leaks under the bike.

Finally, dispose of the used oil in accordance with local regulations and regularly check the oil level to ensure optimal gearbox operation.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to replace the gearbox oil and engine oil of the Moto Guzzi V7
How to replace the gearbox oil and engine oil of the Moto Guzzi V7
V7 Classic In today's tutorial video, you will see the steps to perform routine maintenance by replacing the engine oil and transmission oil of the Moto Guzzi V…
How to Change the Engine Oil of a Moto Guzzi V7
How to Change the Engine Oil of a Moto Guzzi V7
V7 Classic Hello! Today you will change the oil on your Moto Guzzi V7. First, position the bike on the centre stand and warm up the engine for a few minutes. Ne…
How to Replace Oil and Filter on a Moto Guzzi V7 Classic
How to Replace Oil and Filter on a Moto Guzzi V7 Classic
V7 Classic How to replace oil and filter on a Moto Guzzi V7 Classic? Follow this guide to perform maintenance. Position the motorcycle on its original stand, an…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos