|
Do it yourself
| |||
| ||||
|
Model: Husaberg Fe 570
To replace the fuel pump on the Husaberg FE 570, loosen the plastics located on the sides of the fuel tank, which is installed at the front of the bike: once these plastics are removed, you can free the fuel tank from its housing to slide the pump out from the top. The pump must then be extracted and disconnected from the relevant hoses below: this will allow you to insert the new pump, which must be properly connected and secured with screws.
Updated on 23 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Fe 570
To replace the fuel pump on the Husaberg FE 570, you need to loosen the side panels located just below the seat. Once these panels are removed, you c…
Fe 570
This guide outlines the steps to disassemble and replace the water pump gasket on the Husaberg FE 570 enduro bike. First, disconnect the coolant hose…
Fe 570
In order to replace the exhaust on the Husaberg FE 570, you need to loosen the screws that secure the right side panel of the fender: this way you wi…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
