Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Variator and Rollers on the Piaggio Beverly 300

Model: Piaggio Beverly 300
Part:

Video tutorial

Here are the instructions to remove and replace the pulley, variator, and rollers on the Piaggio Beverly 300 scooter, following these simple steps. First, place your scooter on the centre stand and start unscrewing the screws from the transmission cover to remove it; then, unscrew the nut of the fan and the bell, subsequently removing the drive belt as shown in the video.

At this point, remove the variator and replace any rollers found inside; then reassemble the transmission!


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Remove the Fan and Variator on a Piaggio Beverly 300
How to Remove the Fan and Variator on a Piaggio Beverly 300
Beverly 300 In this guide, you will see the main instructions on how to remove and replace the fan, drive belt, and variator on the Piaggio Beverly 300 scooter. …
How to Replace the Air Filter on the Piaggio Beverly 300 iE
How to Replace the Air Filter on the Piaggio Beverly 300 iE
Beverly 300 To replace the air filter on the Piaggio Beverly 300 iE, you need to loosen the screws that secure the cover of the casing located on the left side o…
Headlight adjustment on Piaggio Beverly 300
Headlight adjustment on Piaggio Beverly 300
Beverly 300 Through this very useful video tutorial, we can see the entire operation necessary to adjust the headlight on a Piaggio Beverly 300/350. This operati…

How to Replace the Fork on a Peugeot Kisbee?

To replace the fork on a Peugeot Kisbee, loosen the bolts securing the front wheel to its housing: you will need to unscrew the bolts that hold the corresponding nut to remove the central axle of the wheel. Next, disconnect the brake caliper from the disc and proceed by unscrewing the bolts of the fairings that surround the fork: at this point, you can loosen the bolts that secure the fork to the steering, allowing you to insert the new one. This can then be secured to the steering, covered with the fairing, and the front wheel installed.

Watch the video!


by ScegliAuto

More videos