Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Beverly 300
Part:

In this guide, you will see the main instructions on how to remove and replace the fan, drive belt, and variator on the Piaggio Beverly 300 scooter. First, place the scooter on its stand and start removing the side cover of the transmission by unscrewing all the side screws; then unscrew the central nut of the fan to remove it and subsequently disassemble the belt and variator, as shown in the video. At this point, carry out the repair or replacement of the transmission components, applying the reverse procedure for reassembly!

Posted on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Variator and Rollers on the Piaggio Beverly 300
How to Replace the Variator and Rollers on the Piaggio Beverly 300
Beverly 300 Here are the instructions to remove and replace the pulley, variator, and rollers on the Piaggio Beverly 300 scooter, following these simple steps. F…
Headlight adjustment on Piaggio Beverly 300
Headlight adjustment on Piaggio Beverly 300
Beverly 300 Through this very useful video tutorial, we can see the entire operation necessary to adjust the headlight on a Piaggio Beverly 300/350. This operati…
How to Remove the Transmission on a Piaggio Beverly 300
How to Remove the Transmission on a Piaggio Beverly 300
Beverly 300 This video shows how to remove the entire transmission on a Piaggio Beverly 300 scooter by following these simple steps. First, position the scooter …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos