Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki V Storm 650
Part: Clutch

In order to replace the clutch cable of the Suzuki V-Strom 650, you need to loosen the nuts located at the ends of the cable: the first end is located at the lever on the left side of the handlebars. Once the first end has been loosened, you can proceed to loosen the bolts that secure the other end on the left side of the bike, near the sprocket; at this point, the old cable can be removed from its housing, and the new one can be inserted to ensure that everything functions correctly.


Posted on 29 September 2023 by ScegliAuto



How do you replace the clutch of the Suzuki V-Strom 650?
V Storm 650 .. The replacement of the clutch of the Suzuki V-Strom 650 is carried out by loosening the screws that fix the casing to the right side of the motorcycle,..
How to change the engine oil of Suzuki V-Strom 650?
V Storm 650 .. order to replace the engine oil of the Suzuki V-Strom 650 you have to loosen the oil tank drain plug, placing a container under it to collect the used..
How do you replace the engine oil of the Suzuki V-Strom 650?
V Storm 650 .. The oil change for the Suzuki V-Strom 650 is done by loosening the drain plug of the oil tank, placing a container underneath it to collect..

How to change the engine oil of a Honda CRF 300?

To replace the motor oil of a Honda CRF 300, start by placing the motorcycle on a flat and stable surface. Remove the oil drain plug, located on the bottom of the engine, using a suitable wrench. Allow the old oil to completely drain into an appropriate container. Then, tighten the oil drain plug, making sure it is securely sealed. Proceed to pour the new oil into the engine through the fill cap, which is usually located on the top of the engine. Use a funnel to facilitate the operation and make sure to add the correct amount of oil, as indicated in the owner's manual. After completing the filling, start the engine for a few minutes to allow the oil to circulate and check for any leaks. Finally, turn off the engine and check the oil level, adding more oil if necessary.

Watch the video!


by ScegliAuto

More videos