Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on a Suzuki V-Strom 650, loosen the screws that secure the exhaust end can to its housing, allowing it to be freed from the corresponding supports. Next, widen the ring that connects the exhaust to the exhaust manifold so that it can be completely removed. After removing the old exhaust, insert the new one and ensure it is properly secured and connected to the manifold; once installed, check that everything functions correctly.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust of the Suzuki V-Strom 650
How to Replace the Exhaust of the Suzuki V-Strom 650
V Storm 650 .. To replace the exhaust of the Suzuki V-Strom 650, you need to loosen the screws that secure the protective plastic panel located near the exhaust.. …
How to Replace the Coolant in a Suzuki V-Strom 650?
How to Replace the Coolant in a Suzuki V-Strom 650?
V Storm 650 .. To replace the coolant in a Suzuki V-Strom 650, loosen the screws securing the coolant hose located on the right side of the bike. Disconnect.. …
How to Replace the Headlight Bulb on a Suzuki V-Strom 650
How to Replace the Headlight Bulb on a Suzuki V-Strom 650
V Storm 650 .. To replace the headlight bulb on the Suzuki V-Strom 650, you need to remove the front fairing, which contains the motorcycle's instrument panel. To.. …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos