Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the Royal Enfield Classic 500?

Model: Enfield Classic 500
Part: Engine oil

Video tutorial

The oil change on the Royal Enfield Classic 500 is done by loosening the drain plug located in the central lower part of the motorcycle: once this plug is removed, it will be possible to drain all the used oil into a properly positioned container. Once all the oil has drained out, the plug can be closed and the screws securing the oil filter protection panel on the right side of the motorcycle can be loosened.

This will allow for the oil filter to be replaced, and finally, the oil can be topped up through the breather located on the right side of the motorcycle.


Posted on 15 January 2025 by ScegliAuto


Related tutorials

How to Remove the Spark Plug from a Royal Enfield Classic 500
How to Remove the Spark Plug from a Royal Enfield Classic 500
Classic 500 Before you begin, position your Royal Enfield Classic 500 vertically. Start by disconnecting the spark plug lead from the spark plug itself. Next, us…
Engine Oil and Oil Filter Replacement for the Royal Enfield Classic 500
Engine Oil and Oil Filter Replacement for the Royal Enfield Classic 500
Classic 500 This guide will show you the steps to replace the engine oil and oil filter, performing the routine maintenance service on the Royal Enfield Classic …
How do you replace the exhaust pipe of the Royal Enfield Classic 500?
How do you replace the exhaust pipe of the Royal Enfield Classic 500?
Classic 500 It will be possible to replace the muffler of the Royal Enfield Classic 500 by loosening the screws that fix it to its housing, on the right side of …

How to Polish the Exhaust of Malaguti Xsm 50

In this video, we will briefly go through the main steps to clean and polish the exhaust of the Malaguti Xsm 50 enduro bike. First, remove the silencer and exhaust manifold by unscrewing the fixing screws and nuts; then heat the exhaust to a high temperature to loosen any deposits inside. Next, proceed to polish the exhaust using a light metal brush and suitable products, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos