Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for the Royal Enfield Classic 500

Model: Enfield Classic 500
Part: Engine oil

Video tutorial

This guide will show you the steps to replace the engine oil and oil filter, performing the routine maintenance service on the Royal Enfield Classic 500 motorcycle. First, place the bike on its centre stand and begin to unscrew the oil drain bolt located under the engine, using a socket or spanner; allow the oil to drain into a container for about ten minutes.

Next, unscrew the oil filter cover, removing and replacing the cartridge with a new one; finally, pour in the engine oil, ensuring it meets the specifications listed in the owner's manual!


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How do you replace the engine oil of the Royal Enfield Classic 500?
How do you replace the engine oil of the Royal Enfield Classic 500?
Classic 500 The oil change on the Royal Enfield Classic 500 is done by loosening the drain plug located in the central lower part of the motorcycle: once this pl…
How to Remove the Spark Plug from a Royal Enfield Classic 500
How to Remove the Spark Plug from a Royal Enfield Classic 500
Classic 500 Before you begin, position your Royal Enfield Classic 500 vertically. Start by disconnecting the spark plug lead from the spark plug itself. Next, us…
How to Change the Engine Oil in a Royal Enfield Classic 350?
How to Change the Engine Oil in a Royal Enfield Classic 350?
Classic 500 Changing the engine oil in a Royal Enfield Classic 350, as shown in this tutorial, is a very simple and quick operation. First, wait until the engine…

How to Replace the Headlight Bulbs on the Triumph Speed Triple 765 R?

In this tutorial, you will see how to replace the headlight bulbs on the Triumph Speed Triple 765 R, a very simple and quick operation. First, ensure that the key is not inserted, then locate the large cap at the back of the headlight and remove it by turning it counterclockwise. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos