Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Replacing the motor oil in the Royal Enfield Classic 350, as we can see in this tutorial, is an extremely simple and quick operation. First of all, we wait for the engine to cool down sufficiently, then we position a container under the motorcycle, locate the bolts of the two drain holes and unscrew them using both a 12mm socket wrench and a 19mm wrench. We then let all the oil in the system drain out, open the cap of the secondary filter and clean it from any dirt residue. At this point, we can open the housing of the main filter, insert the replacement, reassemble everything and pour in the new oil through the upper hole.

Posted on 24 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement for the Royal Enfield Classic 500
Engine Oil and Oil Filter Replacement for the Royal Enfield Classic 500
Classic 500 This guide will show you the steps to replace the engine oil and oil filter, performing the routine maintenance service on the Royal Enfield Classic …
How to Remove the Spark Plug from a Royal Enfield Classic 500
How to Remove the Spark Plug from a Royal Enfield Classic 500
Classic 500 Before you begin, position your Royal Enfield Classic 500 vertically. Start by disconnecting the spark plug lead from the spark plug itself. Next, us…
How do you replace the engine oil of the Royal Enfield Classic 500?
How do you replace the engine oil of the Royal Enfield Classic 500?
Classic 500 The oil change on the Royal Enfield Classic 500 is done by loosening the drain plug located in the central lower part of the motorcycle: once this pl…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos