Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Husaberg Fe 570 - Videoguide

Husaberg Fe 570
How to replace the water pump gasket on the Husaberg FE 570.
In this guide, we will see the steps that will allow us to disassemble and replace the gasket of the water pump of the Husaberg FE 570 enduro motorcycle. …read all…
Posted on 20 May 2023 by ScegliAuto
Husaberg Fe 570
How do you replace the fuel pump on the Husaberg FE 570?
Replacing the fuel pump on the Husaberg FE 570 involves loosening the plastics on the sides of the fuel tank, located at the front of the motorcycle. Once …read all…
Posted on 25 April 2023 by ScegliAuto
Husaberg Fe 570
How do I change the fork oil on Husaberg FE 550?
In order to replace the oil of the Husaberg FE 550 fork, you need to unscrew the bolts that secure the front wheel of the bike and completely remove the …read all…
Posted on 10 November 2022 by ScegliAuto
Husaberg Fe 570
How do I replace the fuel pump on the Husaberg FE 570?
In order to replace the fuel pump of the Husaberg FE 570 you have to loosen the side panels that are located on the side of the bike, immediately under the …read all…
Posted on 22 April 2024 by ScegliAuto
Husaberg Fe 570
How to paint the Husaberg headlight
For the painting of the front headlight of the Husaberg FE 570, we place the motorcycle on the stand (or in a stable and safe position, which allows the work …read all…
Posted on 4 March 2024 by ScegliAuto
Husaberg Fe 570
Replacing the battery on Husaberg Fe 570
Remove the saddle and unscrew the two screws located behind the battery compartment, as shown in the video. Remove the box located above the battery itself, …read all…
Posted on 21 February 2024 by ScegliAuto
Husaberg Fe 570
How to replace the oil filter on a Husaberg FE 570
In this video tutorial we will see how to remove and replace the oil filter of a Husaberg FE 570. Before carrying out the filter removal operation it is …read all…
Posted on 25 December 2023 by ScegliAuto
Battery (1) Headlight (1) Oil filter (1) (1) Fuel pump (2)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos