Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Husaberg Fe 570
Part: Battery

Remove the seat and unscrew the two screws located behind the battery compartment, as shown in the video. Remove the small box placed above the battery itself, then unscrew and disconnect the two terminals, remembering that during this operation you always start with the negative terminal and only then move to the positive. Extract the battery from its housing and insert the new one you have purchased. For reassembly, simply proceed in reverse order. As you can see, this is a very simple operation and within reach of even less experienced mechanics. Cheers!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Husaberg FE 570?
How do you replace the exhaust pipe of the Husaberg FE 570?
Fe 570 In order to replace the exhaust on the Husaberg FE 570, you need to loosen the screws that secure the right side panel of the fender: this way you wi…
How to Replace the Exhaust on a Husaberg FE 570?
How to Replace the Exhaust on a Husaberg FE 570?
Fe 570 You can replace the exhaust on the Husaberg FE 570 by loosening the screws that secure the exhaust terminal to its housing, located at the rear mudgu…
How to Replace the Water Pump Gasket on a Husaberg FE 570
How to Replace the Water Pump Gasket on a Husaberg FE 570
Fe 570 This guide outlines the steps to disassemble and replace the water pump gasket on the Husaberg FE 570 enduro bike. First, disconnect the coolant hose…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos