Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide outlines the steps to disassemble and replace the water pump gasket on the Husaberg FE 570 enduro bike. First, disconnect the coolant hose, draining the fluid into a container; then unscrew the screws of the water pump cover, as shown in the video. At this point, remove the impeller to access the gasket, using something thin to remove it and replace it with the new one; insert it correctly and reassemble everything, topping up with the new antifreeze!

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on the Husaberg FE 570?
How to Replace the Fuel Pump on the Husaberg FE 570?
Fe 570 To replace the fuel pump on the Husaberg FE 570, you need to loosen the side panels located just below the seat. Once these panels are removed, you c…
How to Replace the Fuel Pump on the Husaberg FE 570?
How to Replace the Fuel Pump on the Husaberg FE 570?
Fe 570 To replace the fuel pump on the Husaberg FE 570, loosen the plastics located on the sides of the fuel tank, which is installed at the front of the bi…
How to Replace the Oil Filter on a Husaberg FE 570
Fe 570 In this video tutorial, you will learn how to remove and replace the oil filter on a Husaberg FE 570. Before starting the removal process, drain the …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos