Do it yourself
Frequently asked questions about cars and motorcycles
Searched for Peugeot 3008 Gearbox Oil Capacity - The Peugeot 3008 has a gearbox oil capacity of 3.75 liters for the engine DV6C. The transaxle manual MCM 6/1 and transaxle semi-automatic MCP 6/1 have a capacity of 2 liters of 75-80 gear oil.
Page generated automatically based on user searches (*)
How to use the automatic transmission of the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) .. guide, we will see how to use the automatic gearbox of the Peugeot 3008, as well as other models of the manufacturer with gasoline or diesel engines...
How to replace the clutch of the Peugeot 3008 1.6 HDI
Peugeot 3008 (2009-2016 / MK 1, T84) .. to remove and replace the clutch plates of the Peugeot 3008 1.6 HDI. First of all we lift the car and remove the front wheel; after which we unscrew.. .. pins of the axle shafts to remove them from the gearbox; then we unscrew the gearbox screws to get it off the car, removing and replacing the clutch..
How to install the EAT8 gearbox on the Peugeot 3008?
Peugeot 3008 (2016-2023 / P84, MK 2) .. we see the procedure for inserting the EAT8 gearbox into the Peugeot 3008. It is not a very simple procedure: nothing impossible, mind you, but it..
How do you replace the clutch of the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) .. In order to replace the clutch of the Peugeot 3008, you need to lift the car so that you can remove the right front wheel. Then you will have.. .. compartment. You will then be able to locate the gearbox: this will need to be detached in order to locate the clutch between the engine block and the..
How to change the gearbox oil of the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) .. The guide shows how to change the oil in the Peugeot 3008 automatic transmission. The procedure must be carried out both from the engine compartment.. .. a colored Torx55 cap: it is the cap of the gearbox oil tank. Once the car has been lifted, unscrew the tank drain plug, located near the beginning..
When to change the automatic gearbox oil in the Peugeot 3008?
Answer: In the Peugeot 3008, equipped with an ETA6 automatic gearbox, there is no oil change as, according to the parent company, it is not necessary. In addi... read all

Posted on 26-09-2022

Read Answer
What known problems can a Peugeot 3008 1.6 HDi have?
Answer: The Peugeot 3008 is a car that seems to enjoy good opinions in general. Both in terms of management and maintenance costs, according to many owners, i... read all

Posted on 4-06-2021

Read Answer
How many liters of AdBlue can the Peugeot 3008 contain?
Answer: The AdBlue tank capacity of the Peugeot 3008 is the same for most models of the brand: in this vehicle, the maximum capacity of additional liquid that... read all

Posted on 23-05-2023

Read Answer
What does the wording "Gearbox fault" on the Peugeot 3008 mean?
Answer: When the wording "Gearbox fault" appears on the display of the Peugeot 3008, it means that one of the components of the gearbox has a fault. Often the... read all

Posted on 12-02-2022

Read Answer
How many liters of gear oil do you need to put in a Peugeot 3008?
Answer: The amount of gearbox oil to top up in a Peugeot 3008 1.6 Hdi is approximately 2.2 liters. As for the gradation of the same, generally for the change ... read all

Posted on 7-06-2022

Read Answer
(*) This page is automatically generated on the basis of user research and does not in any way express the thought of ScegliAuto.com. If you believe that this page should be removed, write to info@scegliauto.com, specifying the page and the reason why you are requesting the removal.

Pagine correlate:

Peugeot 3008 Gearbox Oil Capacity and Specifications: The Peugeot 3008 has a gearbox oil capacity of 3.75 liters for the engine DV6C. The transaxle manual MCM 6/1 and transaxle semi-automatic MCP 6/1 have a capacity of 2 liters of 75-80 gear oil. The hydraulic actuation requires 0.5 liters of oil. The recommended oil viscosity is SAE 75W-90, and the specifications include VW 501 50. The engine fluids require synthetic oil with a viscosity of 0W-30, and the engine oil volume is 4.25 liters. The gearbox oil for the Peugeot 3008 1.6 HDi 112 hp Diesel 9HR (DV6C) has a viscosity classification of SAE 75W-90. To refill the gear oil, approximately 3 liters are needed, and it should be poured in through the breather hole.

Information generated automatically based on external sources by AI systems and which may in some cases be inaccurate or incorrect.