Do it yourself
| ||||
|
Peugeot 3008 - Video tutorial
Model: Peugeot 3008
MK 1, T84
- Years 2009-2016 Let's see in this guide the step by step instructions to remove and replace the clutch plates of the Peugeot 3008 1.6 HDI. First of all we lift the car and remove the front wheel; after which we unscrew the fixing screws of the plastic protection, as shown in the video. At this point we drain the oil and remove the front wheel arches, unscrewing the pins of the axle shafts to remove them from the gearbox; then we unscrew the gearbox screws to get it off the car, removing and replacing the clutch kit, following the video tutorial to the end!
Posted on 26 May 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the Piaggio Beverly saddle with a flat batteryIn today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |