Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the spare wheel of the Peugeot 3008 located?

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Wheel

On the Peugeot 3008, the spare wheel is positioned inside the trunk compartment: in order to access this piece, you will need to open the rear hatch so that you can detach the lining at the base of the trunk. Underneath it, you will find the wheel, which can now be removed from its housing so that it can be used to replace one of the wheels installed on the car. In the spare wheel compartment, there will also be the jack that should be used to lift the car at the wheel location.

Posted on 28 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on a 2017 Peugeot 3008
Where to Find the OBD Port on a 2017 Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) In this guide, discover where to find the OBD port on your 2017 Peugeot 3008 Mk2. This will allow you to connect any professional diagnostic tool to …
Where is the ECU located in the Peugeot 3008 Hybrid?
Where is the ECU located in the Peugeot 3008 Hybrid?
Peugeot 3008 (2016-2023 / MK 2, P84) In this tutorial, you can see where the engine ECU is located in the Peugeot 3008 Hybrid, useful if you need to replace it. As shown, the ECU is posi…
Where is the airbag control module located in the Peugeot 3008?
Where is the airbag control module located in the Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) In this video, you can see where the airbag control module is located in the Peugeot 3008, useful if you need to replace it. As shown, it is position…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos