Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel on a Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Wheel

See other generations:
Video tutorial

How do you replace the front wheel on a Peugeot 3008? Open the boot and take the wheel removal kit which includes: jack, jack handle, screwdriver, wheel nut key (if present), telescopic spanner, and spare wheel. Position the jack under the jacking point of the vehicle (under the stiffest part of the chassis), lift the car slightly and loosen the wheel bolts.

Raise the car with the jack handle, unscrew the bolts, and pull the wheel off the hub. Fit the spare wheel onto the hub with the respective bolts and lower the car to the ground. Remember to wear a high-visibility vest as required by law.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

Wheel Replacement on Peugeot 3008
Wheel Replacement on Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) Watch this video for instructions on how to remove and replace the wheel on a Peugeot 3008 second series, as well as on most vehicles available on th…
Replacing the Front Brake Pads on a Peugeot 3008
Replacing the Front Brake Pads on a Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) In this guide, you will find instructions to remove and replace the front brake pads on a Peugeot 3008. First, lift the vehicle and begin by removing…
Where is the spare wheel located on the Peugeot 3008?
Where is the spare wheel located on the Peugeot 3008?
Peugeot 3008 (2016-2023 / P84, MK 2) On the Peugeot 3008, the spare wheel is located inside the boot: to access this part, open the tailgate so you can detach the trim at the base of the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos