Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear wheel on a Peugeot 3008

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Wheel

To replace the rear wheel on the Peugeot 3008, insert the jack at the rear of the car so that it can be lifted off the ground. This will allow you to loosen the bolts securing the wheel to the corresponding hub. Then, the wheel can be completely removed, and the new one can be positioned: the new wheel can be secured by reinserting the bolts and tightening them to the correct torque. Finally, lower the car by removing the jack that was previously positioned.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the spare wheel of the Peugeot 3008 located?
Where is the spare wheel of the Peugeot 3008 located?
Peugeot 3008 (2016-2023 / MK 2, P84) On the Peugeot 3008, the spare wheel is positioned inside the trunk compartment: in order to access this piece, you will need to open the rear hatch …
Wheel Replacement on Peugeot 3008
Wheel Replacement on Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) Watch this video for instructions on how to remove and replace the wheel on a Peugeot 3008 second series, as well as on most vehicles available on th…
How to Replace the Timing Belt on a Peugeot 3008?
How to Replace the Timing Belt on a Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) To replace the timing belt on a Peugeot 3008, you need to loosen the bolts securing the front right wheel, allowing it to be completely removed for a…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos