Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Peugeot 3008 1.6 HDi

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

Below are step-by-step instructions on how to remove and replace the battery on the Peugeot 3008 1.6 HDi. First, open the car's bonnet and start by removing the plastic cover found at the top right; then disconnect the air intake and both battery terminals (positive and negative), as shown in the video.

At this point, unscrew the battery bracket screw to remove it; install the new battery of the correct type and with the same amperage, inserting it in the correct orientation and finally reassembling the cover and air intake.


Posted on 22 February 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of a Peugeot 3008
How to Replace the Battery of a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Remove the battery from the Peugeot 3008. Here’s how to remove the damaged battery from inside the compartment. Open and lift the bonnet. You will fi…
How to Replace the Clutch of a Peugeot 3008 1.6 HDI
How to Replace the Clutch of a Peugeot 3008 1.6 HDI
Peugeot 3008 (2009-2016 / MK 1, T84) This guide provides step-by-step instructions for dismantling and replacing the clutch discs of the Peugeot 3008 1.6 HDI. First, lift the vehicle and…
How to Remove the EGR Valve from a Peugeot 3008 1.6 HDi
How to Remove the EGR Valve from a Peugeot 3008 1.6 HDi
Peugeot 3008 (2009-2016 / MK 1, T84) Below are the instructions to remove and replace the EGR valve on a Peugeot 3008 1.6 HDi. First, open the vehicle's bonnet and begin by removing the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos