Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to replace the battery of a Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Battery
Operation: How to replace the battery of a Peugeot 3008

Remove the Peugeot 3008 battery. Let's see how to remove the damaged battery from inside the compartment. We open and lift the engine hood. We will find the battery under the cover plastics. We disassemble the air filter kit, then, we uncover the plastic of the battery. We unscrew the locking pins of the battery terminals, then, we remove the same from the engine compartment. We fit a new battery (same size and voltage). We screw the clamping pins of the terminals and cover the battery with the covering plastics, we assemble the air filter kit. We test the car vehicle 3008 with the ignition.


Posted on 16 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 3008 2009-2016 - Where is the battery of the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why is the Peugeot 3008 Start & Stop system not working properly? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos