Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How do you replace the battery in a Peugeot 3008?

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 P84, MK 2 - Years 2016-2023
Part: Battery
Operation: How do you replace the battery in a Peugeot 3008?

The battery of the Peugeot 3008 is located inside the engine compartment, on the same side as the driver and immediately below the windscreen. To replace it we must first unlock the engine compartment hatch using the lever inside the passenger compartment and then lift it and secure it. At this point we can use a wrench to remove the screws located on the battery support plate, disconnect the poles of the latter (always starting from the negative) and extract it. We install the new one by first connecting the positive pole and then the negative one, reposition the screws and close the tailgate.


Posted on 29 December 2022 by ScegliAuto

    Frequently Asked Questions

    • 3008 2009-2016 - Where is the battery of the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why is the Peugeot 3008 Start & Stop system not working properly? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos