Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How do you replace the battery of the Peugeot 3008 remote control?

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Key
Operation: How do you replace the battery of the Peugeot 3008 remote control?

The procedure for replacing the battery of the Peugeot 3008 remote control is carried out by levering with an object inside the groove located at the bottom of the device: in this way it will be possible to separate the shell of the remote control so that it is possible to remove the battery inside. Once the old battery has been removed, it will be possible to insert the new one into the remote control, so that it is possible to close the remote control again. In this way it will be possible to verify that everything works correctly.


Posted on 17 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 3008 2009-2016 - Why doesn't the Peugeot 3008 key work? Read Answer
    • 3008 2016-2023 - What to do if the ECU does not detect the key on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why is the key of the Peugeot 3008 not detected? Read Answer
    • 3008 2016-2023 - What to do when the key not recognized message appears on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What to do if the Peugeot 3008 does not detect the key? Read Answer
    • 3008 2016-2023 - Why does the keyless remote control of the Peugeot 3008 no longer work? Read Answer
    • 3008 2016-2023 - Why does the Peugeot 3008 remote control not work? Read Answer
    • 3008 2016-2023 - Why does the remote control of the Peugeot 3008 not work? Read Answer
    • 3008 2009-2016 - How to replace the battery in the key of a Peugeot 3008? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos