Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Peugeot 3008 remote control

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Key

The procedure for replacing the battery of the key remote of a Peugeot 3008 car is very simple and quick. The necessary materials are a screwdriver with a flat tip and a flat CR 2032 3V battery. Take the key remote and insert the screwdriver tip into the appropriate slot on the top edge of the casing; pry open the remote with the screwdriver tip until it opens. Then proceed to remove the old battery and replace it with the new one; finally, close the remote with the appropriate casing.

Posted on 31 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Peugeot 3008 remote control
How to replace the battery of the Peugeot 3008 remote control
Peugeot 3008 (2016-2023 / MK 2, P84) The steps to replace the battery of the remote control of a second-generation Peugeot 3008 produced from 2017 to 2022 are simple and quick. The first…
How to Replace the Remote Battery of the Peugeot 3008?
How to Replace the Remote Battery of the Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) To replace the remote battery of the Peugeot 3008, use a tool to lever open the groove located at the bottom of the device: this will allow you to se…
Replacing the Remote Key Battery of the Peugeot 3008
Replacing the Remote Key Battery of the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) To replace the battery in the key/remote of the Peugeot 3008, take a small screwdriver and insert it to lever off the cover with the Peugeot logo. On…

Other guides you may be interested in

    Frequently Asked Questions

    • 3008 2016-2023 - What does the red warning light on the Peugeot 3008 wrench indicate? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos