Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Peugeot 3008 remote control

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

The steps to replace the battery of the remote control of a second-generation Peugeot 3008 produced from 2017 to 2022 are simple and quick. The first step is to insert a flat-tip screwdriver into the small hole on the cover of the remote control.

The second step is to remove the cover of the remote control. The third step is to replace the battery.

The fourth step is to close the cover of the remote control. After completing the four essential steps, go near the vehicle to test the functioning of the remote control.

The above steps can also be followed to replace the battery of the remote control of a Peugeot 5008.


Posted on 30 January 2025 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Peugeot 3008?
How to Replace the Remote Battery of the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) To replace the remote battery of the Peugeot 3008, use a tool to lever open the groove located at the bottom of the device: this will allow you to se…
How to replace the battery of the key remote control of a Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) In the video, you can see how to replace the battery of the remote control key for a Peugeot 3008 car. First, take the car remote control, press the …
How to Replace the Key Fob Battery on the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) To replace the battery in the key fob of the Peugeot 3008, first slide the key out from the top of the device to access its housing. Use a tool to pr…

    Frequently Asked Questions

    • 3008 2016-2023 - What does the red warning light on the Peugeot 3008 wrench indicate? Read answer
    • 3008 2009-2016 - How to replace the battery in the key of a Peugeot 3008? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos