Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on a Peugeot 3008

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
This video is currently unavailable

Replacing the battery in the key fob of a Peugeot 3008 is a very simple and quick operation. You will only need a new battery of the correct model, which is a flat CR 2032, and a small flathead screwdriver or any other tool with a thin tip. Take the key fob of your car and insert the tip of the screwdriver into the small notch on the upper edge of the fob to open it. At this point, use the screwdriver to lever the edge of the battery and remove it. Proceed to replace the battery.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Peugeot 3008?
How to Replace the Battery in a Peugeot 3008?
Peugeot 3008 (2016-2023 / P84, MK 2) The battery in the Peugeot 3008 is located in the engine bay, on the driver's side and just below the windscreen. To replace it, first unlock the eng…
How to replace the battery on a Peugeot 3008?
How to replace the battery on a Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) To replace the battery on a Peugeot 3008, open the bonnet to access the components inside the engine compartment: once the bonnet is open, locate the…
How to Replace the Battery of a Peugeot 3008
How to Replace the Battery of a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Remove the battery from the Peugeot 3008. Here’s how to remove the damaged battery from inside the compartment. Open and lift the bonnet. You will fi…

    Frequently Asked Questions

    • 3008 2016-2023 - What does the red warning light on the Peugeot 3008 wrench indicate? Read answer
    • 3008 2009-2016 - How to replace the battery in the key of a Peugeot 3008? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos