Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Battery on Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

Replacing the battery on a Peugeot 3008? Remove the old battery and install a new one. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the bonnet. Once the engine compartment is open, locate the battery to be removed.

Disconnect the plastic cover, remove the securing pins of the battery terminals, then take it out of the engine compartment and replace it with a new one (same voltage). Close the bonnet after maintenance.

Start the 3008 with the key and test the battery's functionality.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Peugeot 3008?
How to Replace the Battery on a Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) To replace the battery on a Peugeot 3008, open the bonnet to access the components inside the engine bay. On the right side, just below the windscree…
How to Replace the Remote Battery of the Peugeot 3008?
How to Replace the Remote Battery of the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) To replace the remote battery of the Peugeot 3008, use a tool to lever open the groove located at the bottom of the device: this will allow you to se…
How to Replace the Battery of a Peugeot 3008
How to Replace the Battery of a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Remove the battery from the Peugeot 3008. Here’s how to remove the damaged battery from inside the compartment. Open and lift the bonnet. You will fi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos