Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 3008
  6. : How to replace the battery in the Peugeot 3008?

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Battery
Operation: How to replace the battery in the Peugeot 3008?

This video tutorial illustrates the procedure for replacing the battery in the Peugeot 3008. First of all, after opening the front hood and identifying the battery, we need to unscrew all the bolts that will allow us to remove everything that surrounds the battery and, finally , to successfully extract it. During this work, be careful not to forget to release the two poles, first the positive one and then the negative one. To replace the old battery with a new one, you will first have to insert the piece in the right place and then perform all the previous steps again but in reverse order.


Posted on 7 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 3008 2009-2016 - Where is the battery of the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why is the Peugeot 3008 Start & Stop system not working properly? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos