Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve from a Peugeot 3008 1.6 HDi

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: EGR valve

Below are the instructions to remove and replace the EGR valve on a Peugeot 3008 1.6 HDi. First, open the vehicle's bonnet and begin by removing the upper protective cover; find the EGR valve behind the engine block, where you will unscrew all the securing screws to remove it (disconnecting the electrical connector), as shown in the video. At this point, clean it with appropriate products, opting for replacement of the EGR valve if damaged; reassemble and connect the EGR valve, finally starting the engine.

Posted on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fix EGR Valve Issues on Peugeot 3008
How to Fix EGR Valve Issues on Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) The EGR valve is present in nearly all modern engines. Its purpose is to recirculate some of the exhaust gases produced by the engine, reducing harmf…
How to Replace the Clutch of a Peugeot 3008 1.6 HDI
How to Replace the Clutch of a Peugeot 3008 1.6 HDI
Peugeot 3008 (2009-2016 / T84, MK 1) This guide provides step-by-step instructions for dismantling and replacing the clutch discs of the Peugeot 3008 1.6 HDI. First, lift the vehicle and…
How to Replace the Battery on the Peugeot 3008 1.6 HDi
How to Replace the Battery on the Peugeot 3008 1.6 HDi
Peugeot 3008 (2009-2016 / T84, MK 1) Below are step-by-step instructions on how to remove and replace the battery on the Peugeot 3008 1.6 HDi. First, open the car's bonnet and start by r…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos