Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 3008
  6. : How to fix Peugeot 3008 EGR valve problems

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: EGR valve
Operation: How to fix Peugeot 3008 EGR valve problems

The EGR valve is practically present in all new generation engines, its purpose is to re-circulate part of the exhaust gases produced by the engine, reducing the emission of harmful exhaust gases. This device is subject to frequent malfunctions, also caused by dirt that can clog the valve due to the passage of dirty and residual exhaust gases. So here's what to do when your car warns you of a probable engine failure. We disconnect the battery, and disconnect the valve connectors. We remove the suction tube. We unscrew the screws holding the EGR valve and clean the deposits of encrustations with a spray for carburetors. In the video there is a spare to buy in case some parts of the system are damaged.


Posted on 19 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the EGR valve located on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Where is the EGR valve located on Peugeot 3008? Read Answer
    • 3008 2016-2023 - What problems with the EGR valve on the Peugeot 3008? Read Answer

How to replace the AdBlue tank on Peugeot 3008

In order to replace the AdBlue tank on the car it is necessary to know that it is located above the diesel tank and therefore under the rear trunk floor and to access it it is necessary: first of all lift the car on the deck, then remove the lower metal protective casing of the tank and under it we will find the diesel tank. Then proceed to disassemble the tank with the help of a forklift to support it. Once the diesel tank has been freed and lowered, above it we will find the small AdBlue tank.

Watch the video!


by ScegliAuto

More videos