Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 3008
  6. : Complete engine and DPF cleaning of the Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Engine
Operation: Complete engine and DPF cleaning of the Peugeot 3008

If you have engine performance problems, excessive smoke and it is impossible to activate the forced regeneration of the particulate filter, there are special equipment capable of carrying out a complete cleaning of the engine and the DPF; one of these is a device that generates hydrogen from distilled water by reducing the carbon deposits deposited inside the engine with a chemical process of combining hydrogen and carbon and destroying them. The components involved in cleaning are: EGR valve, turbine, valves, injectors, piston, combustion chamber, exhaust line including FAP (particulate filter).


Posted on 5 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 3008 2016-2023 - What problems do the 1.2 Puretech engines have on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What problems have been found on the Peugeot 3008 1.5 HDI 130hp? Read Answer
    • 3008 2016-2023 - What are the problems with the Peugeot 3008 1 6 hdi 2017? Read Answer
    • 3008 2016-2023 - What problems does the 1.5 engine of the Peuget 3008 have? Read Answer
    • 3008 2016-2023 - What problems with the engine of the Peugeot 3008? Read Answer
    • 3008 2009-2016 - What are the most frequent problems on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - How many liters of AdBlue are needed in the Peugeot 3008? Read Answer
    • 3008 2016-2023 - What does the engine fault warning light indicate on my Peugeot 3008? Read Answer
    • 3008 2016-2023 - How much does a scheduled maintenance intervention cost on the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why does the engine fault warning light come on in the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Where is the Peugeot 3008 AdBlue tank located? Read Answer

How to open the Piaggio Beverly saddle with a flat battery

In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos